Seat belts - things you should know!

Sometimes Dermot has kept the whole Monoposto going in spares.
Post Reply
Dermot Healy
Mechanic
Mechanic
Posts: 199
Joined: Thu Jul 10, 2008 9:59 pm

Seat belts - things you should know!

Post by Dermot Healy »

I have recently agreed to act as a point of contact to supply TRS harnesses to Monoposti as the manufacturers
are all geared up to deal though distributors, rather than direct to end users.

You can, of course, buy standard single seater 6pt harnesses from lots of suppliers but you may find you'll make a saving - even if you just want a standard harness - if you speak to me.

The standard harnesses that you'll be offered by most suppliers, or can buy online, will work well in many cars but there can be problems. Some cars (eg Dallaras) have looped fixings on shoulder straps, Some cars (eg FVLs) have anchorage points at a strange angle. Not every manufacturer uses the same size anchorage bolts & using washers to bridge the gap or drilling harness anchorage plates (ever tried doing it?) really is not best practice. And then there is the issue of strap lengths. You don't want random excess shoulder strap webbing tickling your face as you go through Eau Rouge. Nor do you really want the harness buckle situated in your cleavage. And not all of us are the same size and adjusters coming close to their limits bring their own problems. And, of course, you want your harness to work well with a HANS device if you use one.............so........really a harness made to measure can offer real benefits.

Amazingly, the ever so tolerant people at TRS seem happy to produce one off harnesses to match your particular shape, requirements and desires. ....and you have a choice of nice colours as well!

It works like this - I send you a form on which you can specify exactly what lengths/fixings/adjuster types & positions/colour/Hans compatibility /widths etc etc you would like. Return it to me and TRS will make the harness to your spec (so DO get your measurements right!) & it will appear on your doorstep at a cost that will most probably be less than you would pay if you sought out a 'bargain' on eBay or availed yourself of a 'special offer' elsewhere.


07703162409
dermothealy@btinternet.com

User avatar
tristancliffe
Lifetime achievement award
Lifetime achievement award
Posts: 405
Joined: Sat Jul 05, 2008 7:27 pm
Location: Norwich, Norfolk
Contact:

Re: Seat belts - things you should know!

Post by tristancliffe »

I use TRS belts now. Far better than the other brands that I have tried (Willans, Luke, Schroth etc) - the webbing isn't that stiff when new, and details like velcro on the excess straps, and the action of the buckles and adjusters is just lovely. As I'm a boring geek I do tend to stick to black webbing, but I know that Steve Patania had a very pleasing orange colour on his Dallara (which the car still has with the new owner).

I don't plan on using any other brand of harness if I can avoid it.

User avatar
Anson
Flag waver
Flag waver
Posts: 28
Joined: Thu Dec 17, 2009 10:12 pm

Re: Seat belts - things you should know!

Post by Anson »

I think all the good brands are just that - good!

I tend to stick with Willans in my cars as they saved me from serious injury in the only big accident I've had in a single-seater and then, in keeping with their view that you should replace belts after an accident (as they are designed to stretch under load) they replaced the set free of charge. I know they have changed ownership in the meantime but there was a strong Mono connection to Willans in the days of John Fenning through the local "Hampshire Mafia" as it was then with people like Carl Jeanes (aka "The Streaker"), Tony Broster and Sean Ross.

Having said that, the racing Honda we had at the Nürburgring came with the flashy green Takata belts that the factory Hondas in Japanese GT use (we got them foc) and they were lovely so as and when I get around to building the next racing Honda (CRZ with K20 type R engine and Sadev box...) it will have green Takata belts

stevengriffin
Mechanic
Mechanic
Posts: 107
Joined: Thu Dec 04, 2008 2:48 pm

Re: Seat belts - things you should know!

Post by stevengriffin »

The TRS belts I bought via Dermot have been very good, although I have not tested them in extremis.

User avatar
broadside
Recovery
Recovery
Posts: 55
Joined: Sat Jul 12, 2008 3:09 pm
Location: Staffs

Re: Seat belts - things you should know!

Post by broadside »

I use TRS belts from Dermot in the Group 4 Escort, they have nice compact buckle assembly (doesn't stick in your internal organs when braking hard or being trussed in by your unsympathetic helper!) and nice lightweight adjusters, and all at the value for money prices you've come to expect from Mr Healy

RedRedWine
Mechanic
Mechanic
Posts: 141
Joined: Tue Jul 22, 2008 8:18 pm
Location: Wergs

Re: Seat belts - things you should know!

Post by RedRedWine »

Umm, I know this is off thread and we aren't supposed to use the ads section for conversation, but please can we see a picture of this Group 4 Escort?
Tony Cotton
Accepting reality with stoicism

stevengriffin
Mechanic
Mechanic
Posts: 107
Joined: Thu Dec 04, 2008 2:48 pm

Re: Seat belts - things you should know!

Post by stevengriffin »

I thought we should see the state of Broadside's internal organs. Sometimes I do my seat belts up so tight my internal organs risk becoming external organs.

triple j motorsport
Recovery
Recovery
Posts: 75
Joined: Thu Oct 01, 2009 10:01 am

Re: Seat belts - things you should know!

Post by triple j motorsport »

Had them in my Zetec and luckily already fitted in my Duratec they are the best....

User avatar
broadside
Recovery
Recovery
Posts: 55
Joined: Sat Jul 12, 2008 3:09 pm
Location: Staffs

Re: Seat belts - things you should know!

Post by broadside »

[quote="RedRedWine"]Umm, I know this is off thread and we aren't supposed to use the ads section for conversation, but please can we see a picture of this Group 4 Escort?[/quote]

Tony, a few pics at http://www.probynracing.webs.com

RedRedWine
Mechanic
Mechanic
Posts: 141
Joined: Tue Jul 22, 2008 8:18 pm
Location: Wergs

Re: Seat belts - things you should know!

Post by RedRedWine »

Very nice indeed Graham - and if course it's shown at the finest venue in the land.
Tony Cotton
Accepting reality with stoicism

User avatar
broadside
Recovery
Recovery
Posts: 55
Joined: Sat Jul 12, 2008 3:09 pm
Location: Staffs

Re: Seat belts - things you should know!

Post by broadside »

[quote="RedRedWine"]Very nice indeed Graham - and if course it's shown at the finest venue in the land.[/quote]

Yes, a small but challenging little venue, there's always more to be gained - if I could only find out how!!

RedRedWine
Mechanic
Mechanic
Posts: 141
Joined: Tue Jul 22, 2008 8:18 pm
Location: Wergs

Re: Seat belts - things you should know!

Post by RedRedWine »

I've just got new belts for my "static" Dallara from Dermot/TRS. Absolutely great service, superb quality at a very attractive price. I cannot praise Dermot and James highly enough and offer a full endorsement.
Tony Cotton
Accepting reality with stoicism

User avatar
mwalters
Recovery
Recovery
Posts: 61
Joined: Mon Jan 10, 2011 8:19 pm
Location: Sheffield

Re: Seat belts - things you should know!

Post by mwalters »

[quote="RedRedWine"]I've just got new belts for my "static" Dallara from Dermot/TRS. Absolutely great service, superb quality at a very attractive price. I cannot praise Dermot and James highly enough and offer a full endorsement.[/quote]

I can second that.

Post Reply